No image
Wall Penetration Seals

MetraSeal

Scraped 2026-05-20 03:07:10

Product Tabs

Wall Penetration Seals

Pipe penetration seal is a reusable, permanent, water-tight rubber seal. The MetraSeal Pipe Wall Penetration Seal quickly creates a mechanical water-tight seal, filling the space around any round pipe including: concrete, steel, plastic, cast iron, copper, and electrical conduit to…

Read More

Product Description

Pipe penetration seal is a reusable, permanent, water-tight rubber seal.The MetraSeal Pipe Wall Penetration Seal quickly creates a mechanical water-tight seal, filling the space around any round pipe including: concrete, steel, plastic, cast iron, copper, and electrical conduit to name a few. The modular seal design creates a permanent hydrostatic seal rated at 20 psig (40 feet of head), sealing out ground water while absorbing noise and dampening vibration.The MetraSeal mechanical-type seal assembly installs up to 75% faster than standard cured seals, resisting aging, water, oil, ozone and sunlight for up to 25 years. Available in multiple elastomer/hardware materials, the MetraSeal can fit any application. By providing electrical insulation to the pipe joint, it protects against pipe corrosion, protecting your investment.Install around any round pipeAvailable in multiple rubber materials to fit any applicationFaster installationsInstall in all weather conditionsUse in subgrade, exterior or interior applicationsTo quickly calculate the right seal for your application use ouronline seal calculator.For Off-Center applications visit ourOff-Center Seal page.

online seal calculator Off-Center Seal page

Product Highlights

Mechanical, interlocking rubber waterstopRated at 20 psiHelps isolate noise and vibrationEPDM, Nitrile and SiliconeInstalls in any weatherNo curing time

Additional Resources

MetraSeal and Off Center Seal CreatorMetraSeal and Off Center Seal Creator

MetraSeal and Off Center Seal Creator

O&MMetraSeal IOMDownload NowSpec SheetMetrasealDownload NowLiteratureMetraflex_Metraseal.pdfDownload Now

Download Now Download Now View Link Download Now

Submittals

MetraSeal SubmittalDownload NowGalvanized Wall Sleeve SubmittalDownload NowPVC Wall Sleeve SubmittalDownload Now

View Link Download Now View Link Download Now View Link Download Now

Find Your Piping Solution & More

Contact Metraflex

Description

MetraSeal Wall Penetration Seals Pipe penetration seal is a reusable, permanent, water-tight rubber seal. The MetraSeal Pipe Wall Penetration Seal quickly creates a mechanical water-tight seal, filling the space around any round pipe including: concrete, steel, plastic, cast iron, copper, and electrical conduit to… Read More Group 3 Copy 3 Created with Sketch.

Variations (51)

2784824898760434487

$0.00
Nominal Pipe Size1/2″
Actual Pipe O.D.0.840″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.4
Standard Weight Steel Pipe Sleeve No. of Links Needed2.067″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed2.000″

2616589142955932621

$0.00
Nominal Pipe Size3/4″
Actual Pipe O.D.1.050″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.6
Standard Weight Steel Pipe Sleeve No. of Links Needed2.469″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed2.500″

8799180006260242271

$0.00
Nominal Pipe Size1″
Actual Pipe O.D.1.315″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.5
Standard Weight Steel Pipe Sleeve No. of Links Needed2.469″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed3.000″

-162761610258330354

$0.00
Nominal Pipe Size1-1/4″
Actual Pipe O.D.1.660″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.8
Standard Weight Steel Pipe Sleeve No. of Links Needed3.068″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed3.000″

-2214516684338226528

$0.00
Nominal Pipe Size1-1/2″
Actual Pipe O.D.1.900″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.7
Standard Weight Steel Pipe Sleeve No. of Links Needed3.068″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed3.500″

8915948048578695262

$0.00
Nominal Pipe Size2″
Actual Pipe O.D.2.375″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.8
Standard Weight Steel Pipe Sleeve No. of Links Needed3.548″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed4.000″

1582720412971677472

$0.00
Nominal Pipe Size2-1/2″
Actual Pipe O.D.2.875″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.9
Standard Weight Steel Pipe Sleeve No. of Links Needed4.026″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed4.000″

8406460151718366658

$0.00
Nominal Pipe Size3″
Actual Pipe O.D.3.500″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.8
Standard Weight Steel Pipe Sleeve No. of Links Needed5.047″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 300
Core Drill or Cast Hole* No. of Links Needed5.000″

-5549279975267512649

$0.00
Nominal Pipe Size3-1/2″
Actual Pipe O.D.4.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed6.065″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 315
Core Drill or Cast Hole* No. of Links Needed6.000″

-5339242058734332456

$0.00
Nominal Pipe Size4″
Actual Pipe O.D.4.500″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed6.065″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 300
Core Drill or Cast Hole* No. of Links Needed6.000″

308884738471452991

$0.00
Nominal Pipe Size5″
Actual Pipe O.D.5.563″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.13
Standard Weight Steel Pipe Sleeve No. of Links Needed7.981″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 340
Core Drill or Cast Hole* No. of Links Needed8.000″

467225860624632315

$0.00
Nominal Pipe Size6″
Actual Pipe O.D.6.625″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed10.020″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed10.000″

1761808687043219633

$0.00
Nominal Pipe Size8″
Actual Pipe O.D.8.625″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.12
Standard Weight Steel Pipe Sleeve No. of Links Needed12.000″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed12.000″

-3036521258043469824

$0.00
Nominal Pipe Size10″
Actual Pipe O.D.10.750″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed13.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 425
Core Drill or Cast Hole* No. of Links Needed14.000″

-8509076858118404910

$0.00
Nominal Pipe Size12″
Actual Pipe O.D.12.750″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.12
Standard Weight Steel Pipe Sleeve No. of Links Needed15.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 425
Core Drill or Cast Hole* No. of Links Needed16.000″

-8995047546552219778

$0.00
Nominal Pipe Size14″
Actual Pipe O.D.14.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.18
Standard Weight Steel Pipe Sleeve No. of Links Needed17.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed18.000″

5915471680009557648

$0.00
Nominal Pipe Size16″
Actual Pipe O.D.16.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.21
Standard Weight Steel Pipe Sleeve No. of Links Needed19.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed20.000″

8300692132589999250

$0.00
Nominal Pipe Size18″
Actual Pipe O.D.18.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.23
Standard Weight Steel Pipe Sleeve No. of Links Needed21.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed22.000″

-7601880743822624858

$0.00
Nominal Pipe Size20″
Actual Pipe O.D.20.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.25
Standard Weight Steel Pipe Sleeve No. of Links Needed23.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed24.000″

-4923593857845456668

$0.00
Nominal Pipe Size22″
Actual Pipe O.D.22.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.28
Standard Weight Steel Pipe Sleeve No. of Links Needed25.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed26.000″

2189822457189765157

$0.00
Nominal Pipe Size24″
Actual Pipe O.D.24.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.30
Standard Weight Steel Pipe Sleeve No. of Links Needed27.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed28.000″

-2921153828906032386

$0.00
Nominal Pipe Size26″
Actual Pipe O.D.26.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.33
Standard Weight Steel Pipe Sleeve No. of Links Needed29.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed30.000″

-1594219597562619987

$0.00
Nominal Pipe Size28″
Actual Pipe O.D.28.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.35
Standard Weight Steel Pipe Sleeve No. of Links Needed31.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed32.000″

-2754326324139064290

$0.00
Nominal Pipe Size30″
Actual Pipe O.D.30.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.37
Standard Weight Steel Pipe Sleeve No. of Links Needed33.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed34.000″

1768066504774920114

$0.00
Nominal Pipe Size32″
Actual Pipe O.D.32.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.40
Standard Weight Steel Pipe Sleeve No. of Links Needed35.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 475
Core Drill or Cast Hole* No. of Links Needed36.000″

7840706160254449701

$0.00
Nominal Pipe Size34″
Actual Pipe O.D.34.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.29
Standard Weight Steel Pipe Sleeve No. of Links Needed39.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 500
Core Drill or Cast Hole* No. of Links Needed38.000″

3057904427683132054

$0.00
Nominal Pipe Size36″
Actual Pipe O.D.36.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.31
Standard Weight Steel Pipe Sleeve No. of Links Needed41.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 500
Core Drill or Cast Hole* No. of Links Needed40.000″

1215938166900106816

$0.00
Nominal Pipe Size42″
Actual Pipe O.D.42.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.36
Standard Weight Steel Pipe Sleeve No. of Links Needed47.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 500
Core Drill or Cast Hole* No. of Links Needed46.000″

3655455852457427590

$0.00
Nominal Pipe Size48″
Actual Pipe O.D.48.000″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.41
Standard Weight Steel Pipe Sleeve No. of Links Needed53.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 500
Core Drill or Cast Hole* No. of Links Needed52.000″

503193114039574657

$0.00
Nominal Pipe Size1/2″
Actual Pipe O.D.0.625″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.4
Standard Weight Steel Pipe Sleeve No. of Links Needed2.067″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed2.000″

-6734680848120335516

$0.00
Nominal Pipe Size3/4″
Actual Pipe O.D.0.875″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.4
Standard Weight Steel Pipe Sleeve No. of Links Needed2.067″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed2.000″

2738507796570765835

$0.00
Nominal Pipe Size1″
Actual Pipe O.D.1.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.6
Standard Weight Steel Pipe Sleeve No. of Links Needed2.469″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed3.000″

4939853837700506225

$0.00
Nominal Pipe Size1-1/4″
Actual Pipe O.D.1.375″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.5
Standard Weight Steel Pipe Sleeve No. of Links Needed2.469″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed3.000″

2482105972795482631

$0.00
Nominal Pipe Size1-1/2″
Actual Pipe O.D.1.625″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.8
Standard Weight Steel Pipe Sleeve No. of Links Needed3.068″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed3.000″

9110759303185769421

$0.00
Nominal Pipe Size2″
Actual Pipe O.D.2.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.5
Standard Weight Steel Pipe Sleeve No. of Links Needed3.548″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 300
Core Drill or Cast Hole* No. of Links Needed3.500″

4784229115689059023

$0.00
Nominal Pipe Size2-1/2″
Actual Pipe O.D.2.625″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.11
Standard Weight Steel Pipe Sleeve No. of Links Needed4.026″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed4.000″

-3898015721537049583

$0.00
Nominal Pipe Size3″
Actual Pipe O.D.3.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.8
Standard Weight Steel Pipe Sleeve No. of Links Needed5.047″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 315
Core Drill or Cast Hole* No. of Links Needed5.000″

2867892698048486861

$0.00
Nominal Pipe Size4″
Actual Pipe O.D.4.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed6.065″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 315
Core Drill or Cast Hole* No. of Links Needed6.000″

-4176272114441188144

$0.00
Nominal Pipe Size6″
Actual Pipe O.D.6.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.15
Standard Weight Steel Pipe Sleeve No. of Links Needed7.981″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 315
Core Drill or Cast Hole* No. of Links Needed8.000″

-8392000629983009649

$0.00
Nominal Pipe Size8″
Actual Pipe O.D.8.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.9
Standard Weight Steel Pipe Sleeve No. of Links Needed10.020″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 325
Core Drill or Cast Hole* No. of Links Needed12.000″

7526202015312816061

$0.00
Nominal Pipe Size10″
Actual Pipe O.D.10.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.14
Standard Weight Steel Pipe Sleeve No. of Links Needed13.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 410
Core Drill or Cast Hole* No. of Links Needed14.000″

-3758134569031681962

$0.00
Nominal Pipe Size12″
Actual Pipe O.D.12.125″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.16
Standard Weight Steel Pipe Sleeve No. of Links Needed15.250″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 410
Core Drill or Cast Hole* No. of Links Needed16.000″

-176192710572320706

$0.00
Nominal Pipe Size1/2″
Actual Pipe O.D.0.706″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.4
Standard Weight Steel Pipe Sleeve No. of Links Needed2.067″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed2.000″

-396273137565557041

$0.00
Nominal Pipe Size3/4″
Actual Pipe O.D.0.922″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.4
Standard Weight Steel Pipe Sleeve No. of Links Needed2.067″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed2.000″

-7715641056902663435

$0.00
Nominal Pipe Size1″
Actual Pipe O.D.1.163″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.6
Standard Weight Steel Pipe Sleeve No. of Links Needed2.469″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed3.000″

-4617726395630631975

$0.00
Nominal Pipe Size1-1/4″
Actual Pipe O.D.1.510″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.7
Standard Weight Steel Pipe Sleeve No. of Links Needed3.068″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed3.000″

-6394243075192217518

$0.00
Nominal Pipe Size1-1/2″
Actual Pipe O.D.1.740″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.5
Standard Weight Steel Pipe Sleeve No. of Links Needed3.548″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 315
Core Drill or Cast Hole* No. of Links Needed3.500″

-5678634320517314682

$0.00
Nominal Pipe Size2″
Actual Pipe O.D.2.197″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed3.548″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 275
Core Drill or Cast Hole* No. of Links Needed4.000″

1582720412971677472

$0.00
Nominal Pipe Size2-1/2″
Actual Pipe O.D.2.875″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.9
Standard Weight Steel Pipe Sleeve No. of Links Needed4.026″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 200
Core Drill or Cast Hole* No. of Links Needed4.000″

8406460151718366658

$0.00
Nominal Pipe Size3″
Actual Pipe O.D.3.500″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.8
Standard Weight Steel Pipe Sleeve No. of Links Needed5.047″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 300
Core Drill or Cast Hole* No. of Links Needed5.000″

-5339242058734332456

$0.00
Nominal Pipe Size4″
Actual Pipe O.D.4.500″
Standard Weight Steel Pipe Sleeve MetraSeal Model No.10
Standard Weight Steel Pipe Sleeve No. of Links Needed6.065″
Standard Weight Steel Pipe Sleeve Hole I.D.MS 300
Core Drill or Cast Hole* No. of Links Needed6.000″

General Attributes

No general attributes scraped.

PDF Documents

Download Now Open PDF
Download Now Open PDF
Document Open PDF
Document Open PDF
Document Open PDF
Document Open PDF
Submittals Open PDF